05-02-2010, 10:06 PM
|
|
Administrator
|
|
تاريخ التسجيل: May 2009
الدولة: مصر
المشاركات: 6,930
معدل تقييم المستوى: 10
|
|
parallel generators
السلام عليكم ورحمة الله وبركاته
غالبا الشبكات الكهربائية تحتوي على اكثر من مولد يعملون بنفس الوقت. عادتا اثنان او اكثر يعملون على التوازي
الاسباب التي يتم استخدام التوصيل التوازي للمولدات
1. Availability- التوافرية.
2. Reliability- الاعتمادية او المصداقية
3. flexibility-المرونة
4. serviceability-المتانة
5. High Quality & Cost Effectiveness
راجع الملف المرفق لمعلومات اكثر عن الفوائد
هنالك ثلاثة شروط يجب توافرها لتشغيل المولدات على التوازي .
Their terminal voltages must be equal.
If the voltages of the two AC generators are not equal, **e of the AC generators could be picked up as a reactive load to the other AC generator. This causes high currents to be exchanged between the two machines, possibly causing generator or distributi** system damage.
Their frequencies must be equal.
A mismatch in frequencies of the two AC generators will cause the generator with the lower frequency to be picked up as a load ** the other generator (a c**diti** referred to as "motoring"). This can cause an overload in the generators and the distributi** system.
Their output voltages must be in phase.
A mismatch in the phases will cause large opposing voltages to be developed. The worst case mismatch would be 180° out of phase, resulting in an opposing voltage between the two generators of twice the output voltage. This high voltage can cause damage to the generators and distributi** system due to high currents.
والحمد لله من قبل ومن بعد
__________________
اللهم اغفر لابي واختي يارب العالمين
اسالكم الدعاء
|